F3125 4G/3G Industrial router successfully applied self-service camera networking system
F3125 GPRS ROUTER is a kind of cellular terminal device that provides data transmission function by public GPRS
network.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422) and Ethernet port that
can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing
serial and Ethernet devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry,
finance, POS, water supply, environment protection, post, weather, and so on.
Product Feature
Design for Industrial Application
High-powered industrial cellular module
High-powered industrial 32bits CPU
Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
Housing: iron, providing IP30 protection.
Power range: DC 5~35V
Stability and Reliability
Support hardware and software WDT
Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
Ethernet port: 1.5KV magnetic isolation protection
RS232/RS485/RS422 port: 15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and overvoltage protection
Antenna port: lightning protection(optional)
Standard and Convenience
Support standard RS232(or RS485/RS422), Ethernet port that can connect to serial, Ethernet devices directly
Support intellectual mode, enter into communication state automatically when powered
Provide management software for remote management
Support several work modes
High-performance
Support 3G/HSPA/4G WAN access methods.
Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
Support local and remote firmware upgrade,import and export configure file.
Support NTP, RTC embedded.
Support mulitiple DDNS provider service.
Support MAC Address clone, PPPoE Server
Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
Support APN/VPDN
Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, ttraff,statistics, real time link speed statistics etc.
Full protocol support , such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, SSHD, etc.
Schedule Reboot, Schedule Online and Offline,etc.
Convenient configuration and maintenance interface（WEB or CLI）
Product Specification
Cellular Specification
Cellular Module | Industrial cellular module |
Standard and Band | EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz(optional) Compliant to GSM phase 2/2+ GPRS class 10, class 12(optional) |
Bandwidth | 85.6Kbps |
TX power | GSM850/900：<33dBm GSM1800/1900：<30dBm |
RX sensitivity | <-107dBm |
Hardware System
Item | Content |
CPU | Industrial 32bits CPU |
FLASH | 8MB(Extendable to 64MB) |
SDRAM | 64MB |
Interface type
Item | Content |
Ethernet | 1 10/100 Mbps Ethernet port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
Serial | 1 RS232(or RS485/RS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5(optional), 2 Parity: none, even, odd, (space, mark) (optional) Baud rate: 2400~115200 bps |
Indicator | "Power", "System", "Online", "Link/ACT", "Alarm", “Signal Strength” |
Antenna | Standard SMA female interface, 50 ohm, lighting protection(optional) |
SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection |
Power | Standard 3-PIN power jack, reverse-voltage and overvoltage protection |
Reset | Restore the router to its original factory default settings |
Power supply
Item | Content |
Standard Power | DC 12V/1.5A |
Power range | DC 5~35V |
Consumption | <450mA (12V) |
Physical Characteristics
Item | Content |
Housing | Iron, providing IP30 protection |
Dimensions | 157x97x25 mm |
Weight | 440g |
Environmental Limits
Item | Content |
Operating Temperature | -35~+75ºC（-31~+167℉） |
Storage Temperature | -40~+85ºC (-40~+185℉) |
Operating Humidity | 95% ( unfreezing) |
Application
Four-Faith 4G/3G Industrial router successfully applied self-service camera networking system
With the development of technology, people who travel, dining, shopping have become increasingly fast, with the emergence of a number of self-service vending machines, such as beverage vending machines, snack vending machines, snack vending machines, there are also crab vending machines when crabs on sale. However, the citizens’ "appetite" did not stop there, spiritual needs are equally important, and thus there has been a self-camera maker.
Now, in the metro areas of major cities, vehicle, rush Hall, tourism, rental industry, etc., can find self-service camera. Self-service camera can not only take ID pictures, you can also take fun pictures. The citizens can easily get all kinds of pictures they need through a simple self-service operation, and only about 10 seconds to print, convenient and popular
High frequency in using self-service camera, large data storage, prone to some minor glitches. A system integrator in Guangdong develop an intelligent system using Four-Faith router as communication terminal for online networking management of self-service camera equipments.
Four-Faith is the largest outdoor self-service terminal provider in Guangdong area. Four-Faith 3G router is using to networking upgrade the self-service camera equipments, and to solve wireless communication and networking problem of the equipments, and improve the stability of the terminal device and system operators
On-site Images :
Success case:
Product Tags:
|
|
F3125 4G/3G Industrial router successfully applied self-service camera networking system Images
|
